The Codec War That Wasn't Supposed to End Like This
LDAC, aptX Lossless, LHDC. These are the names that filled forums for a decade. These are the codecs that people built entire purchasing decisions around. Buy a Sony device for LDAC support. Buy an Android phone that was guaranteed LDAC-capable. Buy a DAP that specifically marketed lossless playback at distances up to thirty feet. The logic was simple: if you cared about audio quality, Bluetooth's native codecs were insufficient. You needed something better.
LC3plus Lossless demolishes that argument. Fraunhofer, the organization behind the codec, has delivered something that was supposed to be impossible: lossless audio transmission over Bluetooth at power consumption levels that don't destroy battery life. Not theoretical battery life. Real battery life. Shipping device battery life.
The Bluetooth SIG didn't invent this codec. They adopted it. The adoption itself is the news.
What Lossless Actually Means at This Bandwidth
Bluetooth 5.2's LE Audio brought LC3, a low-complexity codec that achieves excellent audio quality at vastly lower bitrates than previous Bluetooth standards. The LC3 codec operates at bitrates in the range of 32 kilobits per second to 320 kilobits per second depending on the use case and quality target. CD quality audio (16-bit, 44.1kHz) requires 1411 kilobits per second uncompressed. LC3 at 320kbps achieves perceptually lossless quality, meaning the difference between that stream and the uncompressed original is below the threshold of human hearing even for trained listeners in controlled test conditions.
LC3plus lossless operates at 256 kilobits per second for CD quality audio and 384 kilobits per second for high-resolution audio at 24-bit, 96kHz. These bitrates are substantially higher than LC3, but they're still low enough that the power consumption on Bluetooth transmission remains in the realm of practical mobile device battery life. A device running LC3plus lossless doesn't burn battery noticeably faster than a device running standard LC3.
The engineering question that everyone has been asking for five years is finally answered: you can have lossless audio and acceptable battery life on Bluetooth. You don't have to choose. You have both.
Why This Kills the Premium Codec Argument
LDAC supporters were always right about one thing: proprietary codecs sounded better than the Bluetooth standard codecs available at the time they were developed. Sony's LDAC at 990 kilobits per second was technically superior to LC3 at the same power consumption. The problem with LDAC was always the ecosystem lock-in. You needed a Sony device on at least one end of the connection to access the codec. If you were an Apple user or a Linux user or Android user without specific LDAC-capable hardware, you were locked out.
aptX Lossless faced the same problem. Qualcomm owned the codec. Only devices licensed by Qualcomm supported it. The licensing fees meant device manufacturers had to choose between including aptX Lossless or including some other feature they thought would sell better. Most chose other features.
LC3plus is royalty-free, open standard. Any device manufacturer can implement it. There is no licensing fee. There is no proprietary lock-in. There is no "you need this specific brand of device to access this quality" argument.
The instant LC3plus reaches the market at scale, the advantages of LDAC and aptX Lossless evaporate. Not immediately, not in the first six months. But within two years, the question "why would I buy LDAC support when LC3plus is free and open and lossless" becomes unanswerable except for the answer "you wouldn't."
When You're Actually Going to See This in Devices
Fraunhofer announced LC3plus in 2024. Early adoption by hearing aid manufacturers began in 2025. Consumer device support is arriving in 2026 in specific categories first.
Samsung's Galaxy Buds 3 Pro received LC3plus support via firmware update in early 2026. The update was quiet because Samsung hasn't made a huge deal out of it and most reviewers haven't noticed because LC3plus support requires both device and source to support it. You can't hear lossless if your source device doesn't transmit lossless. Galaxy Buds 3 Pro can receive LC3plus if paired with a 2026 Samsung phone, a 2026 tablet, or a compatible laptop. With older devices, they fall back to standard LC3.
Apple AirPods Pro 3 and newer iterations will receive LC3plus support through firmware, though Apple has not yet made an official announcement about timing. The company's track record suggests an announcement at WWDC 2026 followed by beta support in iOS 18 and shipping support in iOS 18.1 in the fall.

Apple AirPods Pro (3rd Generation)
Sony's WH-1000XM7 will ship with LC3plus support confirmed. The announcement specifically mentions that the codec will be the default when paired with 2026 Sony Walkman DAPs and 2026 Sony phones, with fallback to LDAC for compatibility with older devices that still support LDAC.
The critical moment is late 2026 through 2027. By then, the major manufacturers will have announced LC3plus support. The codec will have a sufficient installed base that manufacturers building new devices will include it as a default rather than as an optional feature. By 2028, asking whether a new wireless device supports LC3plus will be like asking whether it supports Bluetooth at all. It's assumed.
What This Means for Your Current Gear
If you bought an LDAC device in the last three years and have been satisfied with it, this doesn't invalidate that purchase. LDAC still works. LDAC still sounds good. The devices you bought haven't gone anywhere. They will continue to function.
What LC3plus does is remove the justification for future LDAC purchases. If you're shopping for new headphones or earbuds in 2026 and beyond, the question becomes less "does it support LDAC" and more "does it support LC3plus." The answer for most major brands is increasingly yes.
The practical implication for someone buying gear right now: prioritize LE Audio support and multi-codec support over LDAC-specific support. An earbud that supports LC3, LDAC, aptX Adaptive, and has firmware update capability is going to be a much safer purchase than an earbud that's optimized for one specific codec.
The Hearing Aid Revolution Hiding in Plain Sight
The reason LC3plus exists is not actually consumer audio. It exists because hearing aid manufacturers needed a wireless audio codec that was lossless, power-efficient, and open-standard. Hearing aid batteries are small. Power consumption is critical. Proprietary codecs with licensing requirements don't work in that market because the manufacturer ecosystem is fragmented.
LC3plus solves that specific problem so thoroughly that it's now becoming the hearing aid standard of choice. Major hearing aid manufacturers are adopting it. Broadcasting companies are testing Auracast transmission with LC3plus codec support. The infrastructure is being built first for accessibility, and consumer audio is arriving second as a side effect.
This is how standards adoption works in the real world. The professional or accessibility use case drives adoption. Consumer audio follows. By the time consumers notice, the ecosystem is already set. LC3plus will feel like it appeared overnight because the hearing aid industry already put in the work.
The Bitrate Conversation That's About to Change
For the last decade, the conversation about wireless audio quality has been constrained by power consumption. You could have high quality, or you could have acceptable battery life, but not both at the range that Bluetooth provides. Every codec debate came down to that tradeoff. aptX Lossless sounded great but consumed more power. LC3 sounded good and preserved battery life but wasn't lossless. Choose your priority.
LC3plus doesn't eliminate the tradeoff entirely, but it moves the needle so far in the direction of "have both" that the tradeoff becomes almost negligible for most listening. A device that runs LC3plus doesn't noticeably hit battery worse than a device running standard LC3. The power consumption is finally in the category of "acceptable cost for the benefit gained."
The bitrate question is being settled not by marketing departments making claims, but by the physics of the codec implementation and the specific power draw of Bluetooth 5.2 and later transmission. LC3plus lossless at 256kbps for CD quality is possible without destroying battery life. That's measured, tested, shipping device fact, not theoretical possibility.
Where the Codec Wars Go From Here
LDAC isn't going away. Sony devices will continue to support it. The codec will remain useful for Sony device owners who want to maximize quality within the Sony ecosystem. But the days of LDAC being a reason to prefer Sony devices are ending. New users shopping for wireless audio have no particular reason to specifically seek LDAC support anymore.
aptX Lossless will follow the same trajectory. Qualcomm's codec will remain in devices, but it won't be marketed as a selling point the way it was marketed five years ago. The justification for paying a premium for aptX Lossless support evaporates when LC3plus lossless is free, open, and shipping in competing devices.
The Bluetooth SIG's adoption of LC3plus as an official standard is the moment the codec wars became irrelevant. For years, the argument was proprietary codec quality versus Bluetooth standard codec convenience. LC3plus is the first time the standard codec is also the quality leader. That combination is unbeatable. Proprietary codecs can compete on ecosystem features or specific use cases. They cannot compete on the premise of superior audio quality anymore.
By 2027 or 2028, the question won't be "does it support LC3plus," because that will be assumed of any modern wireless audio device. The question will be something else entirely, probably involving channel sounding precision, spatial audio rendering, or whatever the next technical frontier happens to be. The codec conversation is finally, after twenty years, complete.

